• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will safeguard your prized possession from theft. This system is discrete and does not require any additional key fobs.

The device uses buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin code sequence that can be modified up to 20 times. This will then authorize the start-up of your vehicle.

Simple PIN code Change Process

With the rising rate of vehicle theft, many owners are seeking to improve their security. There are many types of security devices that are sold aftermarket, from tracking systems to alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. While a tracking system can help you find your vehicle in the event of theft, it does not stop the crime from occurring in the first in the first place. Immobilisers, however are exactly what they state on the label - they disable your car's motor so that it can't be started. The Autowatch bmw m4 ghost installer is one of the most advanced options available, making it nearly impossible for thieves steal your vehicle.

Utilizing the buttons already in your car, the ghost 2 immobiliser installation device creates an unique sequence that must be entered before the engine starts. This can be accomplished using the indicator stalk windows or heater buttons. In addition it is possible to use an app on mobile that can act as an emergency PIN code override, allowing the driver to operate the car without having to use the button sequence. This is especially beneficial if you have to hand your car over for valet parking or maintenance since the immobiliser will remain active and not deactivated.

The ghost immobiliser review is an innovative and unique device that works by using the buttons on your vehicle rather than as a standalone unit. It is not only an effective deterrent to theft of your vehicle and vandalism, but it can also be used on any future vehicles you may own. This makes it a more cost-effective option than a traditional wheel lock.

Weatherproof small device

The Autowatch Ghost Immobiliser is a sophisticated security system that safeguards your pride & joy from key cloning and hacking. It also blocks ECU swapping. It's a small, weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be fitted into the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also immune to jamming devices which are a typical technique used by thieves to get around immobilisers.

The benefit of using CAN data is that it runs silently compared to traditional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing techniques and cannot be recognized by conventional diagnostic tools. The Autowatch ghost does not produce LED indications and uses the buttons on your vehicle, such as the steering wheel, centre console or door panels to create a unique, programmable disarm sequence. You can even create a sequence that is up to 20 presses long to increase security. The iPhone app is limited to one connection, with an individual pairing code for the auto ghost immobiliser. All communication between the two devices is encrypted.

The range rover sport ghost installer stops car thieves from adding an ignition key that is not in use or replacing the ECU to bypass the immobiliser. The engine will only start when a valid PIN code has been entered. It is also possible to put it in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) to allow you to transfer your vehicle to a valet service for maintenance without having to enter a PIN.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket CAN bus immobiliser that connects to the wiring of your vehicle and connects to your engine control unit (ECU). The device snoops on electronic signals to block the system of your vehicle from going through its normal initialization process until you enter the passcode you have created. The system can be activated or deactivated by using your smartphone's application without the need for additional wires.

Standard factory immobilisers for automobiles function through a transponder built into the key that transmits an indication to the ECU. The car will start if the correct code is sent. If, however, the transponder from a different vehicle is used instead, the immobiliser won't recognise it. This allows the vehicle be stolen and then started. The Ghost immobiliser was developed by a South African company at the top of security systems for vehicles technology. It safeguards your vehicle from hacking, key cloning and even key theft. The only way thieves could steal your vehicle is physically towing it away and even then, they wouldn't be able to drive it.

Ghost makes use of the buttons on your car, such as the indicator stalk as well as the steering wheel and door panels to generate an unique, changeable PIN code sequence that must be entered before you can use your car. This is not required to use additional hardware like a key-fob and can last up to 20 presses long. It is also unrecognizable to diagnostic equipment and does not transmit radio frequency signals, so thieves are not able to make use of sophisticated RF scanning or code grabbing technology to discover that the security system has been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks, Ghost is concealed within the vehicle so it can't be taken away or disabled by thieves and is more difficult to remove from a car alarm which requires disarming via a button sequence. This makes it a great complement to an GPS tracking device that can be used to track your vehicle after it's been taken.

Emergency PIN code override

You don't have to look far on social media to find stories or videos of cars that have been stolen with the most advanced technology tools. This includes key-cloning devices and hacking tools that allow them to start the vehicle with the original keys.

Our Ghost immobiliser combats this issue and offers an additional layer of security to stop your vehicle from being taken in the event of being targeted by thieves. It works by creating a unique pin code push sequence from your existing buttons on the steering wheel, door panel and centre console. This unique PIN is entered along with your original key fob to stop the engine from getting started. The unique PIN for override can be found on the black card that you will receive after installation. It is simple to remember because there are no LED indications.

The device is hidden in the wiring of your vehicle and does not emit radio signals. Therefore, it cannot be detected using diagnostic software that can determine what type of security systems you have installed. This makes it an excellent alternative to a tracking device.

In contrast to other security systems which use a relay in engine bay, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable the vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect an analogue immobiliser, alarm or tracker with these systems but this must be specified before installing the device. They are also fully service/valet mode compatible and are a great alternative to a tracker if you are having your car in for repairs to an electrical issue at the dealership.

Service/Valet mode

In recent years there has seen an increase in the number of cars being stolen without the owners keys. It's now easier than ever before to steal your pride & joy with the availability of key cloning devices and door lock picks. To stop this, we have launched the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys have been cloned or your car was stolen.

It directly communicates with your car's ECU (Engine Control Unit) through the CAN data loop. It is completely silent since it doesn't use radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also stops you from introducing an ECU or key to circumvent the system, as only the PIN code allows the engine to start.

The device is hidden within your car and is reached via the buttons on your steering wheel, centre console, and door panels. Before you can begin your car, you must enter a unique, changeable PIN code that can be as long as 20 digits.

This is the very first aftermarket CAN bus immobiliser that was designed. It can prevent your vehicle from being driven or started in the event that you do not enter a PIN code before entering. If the device is activated and you attempt to drive off it will display an indication on your dash that will flash regularly for around 300m, if you enter your PIN code at this point it will deactivate the anti-hijack device and your car will continue to operate in the normal way. If you don't enter your PIN at this point the indicator will continue to flash and require a new pin code every time you try to start your car.